This unit of competency provides the participant with the knowledge and skills to safely operate a boom-type elevating work platform (EWP) (boom length 11 metres or more) for licensing purposes. It involves the operation of a telescoping device, hinged device, or articulated device or any combination of these used to support a platform on which personnel, equipment and materials may be elevated to perform work. The 11-metre boom length shall be taken to mean the greater of the following:
(a) the vertical distance from the floor of the platform to the surface supporting the (EWP) with the platform at its maximum height, or
(b) the nominal reach, measured horizontally from the centre point of rotation to the outer edge of the platform in its most extended position
Topics covered include planning the work; conducting routine checks; setting up, operating, shutting down and securing the EWP. This unit is aimed at new entrants and existing workers in various sectors including the Construction, Resources and Infrastructure or Transport and Logistics industries who will be operating an EWP as part of their daily workplace activities. Upon successful completion of this unit, the participant receives an Interim Assessment Notice and Statement of Attainment, which will enable them to apply to the Northern Territory regulatory body for a nationally recognised Licence to Perform High Risk Work - Elevating Work Platform (EWP).
This unit of competency is delivered over 2 days and consists of theory and practical demonstration including practice time. Delivery is at All Global Training’s training facilities or at your workplace by arrangement.
Special rate of $450.00 Per person applies for bookings made before 30th June 2020, The standard two-day course cost $499.00.
Please note additional fees are payable to NT Worksafe for processing of High Risk Work Licence applications.
Full Payment for your course must be made at least the day prior to the course commencement. When paying EFT the payment must be received at least the day prior to the course commencement. Your place will be confirmed in the course once payment is made in full and course pre-requisites are meet.
If you are enrolling in multiple course’s and the total value exceeds $1500 please contact us to discuss how your payments can be made.
Payment for this course can be made via Cash, Credit Card, Direct Deposit, and Paypal. Please ensure payment is made prior to commencing your course.
Day training course with All Global Training between Monday and Friday include lunch it is provided at no extra cost to students, meals are delivered directly to your training room 12 pm daily, after hours courses and weekends do not include lunch.
For further information on fees and changes please visit our fees and charges page.
As per NT Worksafe requirements:
To be eligible to apply for a licence, you must:
Participants must provide Photographic Identification (Licence, Passport etc.) and an NT address. Participants who do not have an NT address and are Fly In Fly Out (FIFO) workers must present a letter from their employer confirming that they are employed at a NT worksite or complete a statutory declaration which must include the following wording: “I solemnly declare that my primary/permanent place of work is at (location) for (employer)”.
If participants are unsure of what may be involved, they should contact us immediately to speak to an assessor. If assistance is required in regards to language, literacy and numeracy, please advise your trainer prior to enrolment. Our Student Handbook contains our policies and procedures for information prior to enrolment and is available for download from our website www.allglobaltraining.com.au
You will need to have a USI. A USI gives you access to your online USI account which is made up of ten numbers and letters. It will look something like this: 3AW88YH9U5.
A USI account will contain all your nationally recognised training records and results. One of the main benefits of the USI is that you will have easy access to your training records and results throughout your life.
To apply for your USI, to watch an informative short video, for a fact sheet or for any general queries about the USI please visit www.usi.gov.au.
You will be required to provide All Global Training with your USI when you enroll with us.
Elevating Work Platform (EWP) Verification of Competencies can be delivered on-site and at our training facility. For more information, please contact the facility.
Participants are required to wear appropriate clothing including PPE (high visibility, long sleeved shirt, long trousers) and steel capped boots. All Global Training will provide participants with learning material and assessment documentation pursuant to the nationally mandated assessment instrument produced by Safe Work Australia. A range of assessment methods are used to enable participants to demonstrate competency including: written knowledge test, written calculations test and practical test. The knowledge and calculation tests must be completed in the English language and without assistance, reference books, materials or course notes however an electronic calculator can be used for the calculations test. The practical test has a series of skills and abilities that must be demonstrated under the direct observation of the assessor. All Global Training trainers and assessors hold TAE40110 Certificate IV in Training and Assessment, can demonstrate industry knowledge and competence and are WorkSafe approved. The trainer will let you know on the day of training whether you have successfully completed the course and provide you with guidance/advice if you require additional training to complete the unit.
Recognition of Prior Learning (RPL and Credit Transfer) is the recognition of skills and knowledge gained through formal training, work experience and life experience. If participants have current experience the course time may be reduced. They may be asked to provide additional evidence to support their application, or participate in a challenge test to assist All Global Training staff in determining their current level of knowledge and skills. All Global Training is obliged to recognise AQF qualifications and statements of attainment issued by other registered training organisations. Direct Credit Transfer is available for students who enrol in a course and have an existing equivalent unit of competency from the same or another course. RPL and CT can only be granted against the knowledge and skills component of this course, NOT the assessment. Participants must still undertake the mandatory High Risk Work Licence National Assessment Instrument.
Please refer to our Refund Policy (Hyperlink to Refund Policy page)
|Course title||Start date||End date||Location||Price|
|TLILIC0005 Licence to operate a boom-type elevating work platform (boom length 11 metres or more) 2 day Course||Start: 29 Oct 2020||End: 30 Oct 2020||Location: 4/66 Coonawarra Road, Winnellie, NT||$450.00||Enroll now|
|TLILIC0005 Licence to operate a boom-type elevating work platform (boom length 11 metres or more) 2 day Course||Start: 19 Nov 2020||End: 20 Nov 2020||Location: 4/66 Coonawarra Road, Winnellie, NT||$450.00||Enroll now|
|TLILIC0005 Licence to operate a boom-type elevating work platform (boom length 11 metres or more) 2 day Course||Start: 10 Dec 2020||End: 11 Dec 2020||Location: 4/66 Coonawarra Road, Winnellie, NT||$450.00||Enroll now|
Call us on 08 8947 4444 to learn more about our courses RTO Number 45224